- Large digital display
- Accepts industry standard PNP sensors
- Dual setpoint, with separate relay outputs.
- All terminals for incoming field connections are located on printed board.
- Easy calibration with a one-turn potentiometer.
Advanced motor start-up protection:
◦ Three second to start-time frame: Monitored equipment has three seconds from start to run.
◦ Monitors acceleration up to full speed. If monitored equipment should overload before reaching (Normal) operation speed, shut down will occur before damaging equipment.
◦ Any de-acceleration before reaching operating speed feature
LED STATUS INDICATORS:
◦ 10% Speed Reduction
◦ 20% Speed Reduction:
◦ Arm (will light when monitored equipment reaches 90% of normal speed during startup),
◾10% Speed Reduction: N/O and N/C Relay Contacts
◾20% Speed Reduction-: N/O and N/C Relay Contacts
◾ Alarm output: N/O Relay Contacts
◾ 4-20 milli-amp out: ◾12 milli-amp=100%